From MMGWiki
2008
A Strong Contrast Homogenization Formulation for Multi-phase Anisotropic Materials
Authors: D. T. Fullwood, B. L. Adams, and S. R. Kalidindi
Journal: in press, Journal of the Mechanics and Physics of Solids, 2008.
Spectral Representation of Higher-Order Localization Relationships for Elastic Behavior of Polycrystalline Cubic Materials
Authors: S. R. Kalidindi, G. Landi, and D. T. Fullwood
Journal: in press, Acta Materialia, 2008.
A new spectral framework for establishing localization relationships for elastic behavior of composites and their calibration to finite element models
Authors: M. Binci, D. Fullwood, and S. R. Kalidindi
Journal: in press, Acta Materialia, 2008.
Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals
Authors: M. Knezevic, S. R. Kalidindi, and D. Fullwood
Journal: in press, International Journal of Plasticity, 2008.
Application of Microstructure Sensitive Design to Structural Components Produced from Hexagonal Polycrystalline Metals
Authors: T. Fast, M. Knezevic and S. R. Kalidindi
Journal: in press, Computational Materials Science, 2008.
Analyzing Indentation Behavior of LaGaO3 Single Crystals using Sharp Indenters
Authors: S. Pathak, S. R. Kalidindi, B. Moser, C. Klemenz, and N. Orlovskaya
Journal: in press, Journal of the European Ceramic Society, 2008.
Analyzing Indentation Stress-Strain Response of LaGaO3 Single Crystals using Spherical Indenters
Authors: S. Pathak, S. R. Kalidindi, C. Klemenz, and N. Orlovskaya
Journal: in press, Journal of the European Ceramic Society, 2008.
Microstructure reconstructions from 2-point statistics using phase recovery algorithms
Authors: D. T. Fullwood, S. R. Niezgoda and S. R. Kalidindi
Journal: in press, Acta Materialia, 2008.
A crystal plasticity finite element analysis of cross-grain deformation heterogeneity in equal channel angular extrusion and its implications for texture evolution
Authors: S. Li, B. R. Donohue, and S. R. Kalidindi
Journal: Materials Science and Engineering A, doi:10.1016/j.msea.2007.06.073, 2008.
Gradient-based Microstructure Reconstructions from Distributions Using Fast Fourier Transforms
Authors: D. T. Fullwood, S. R. Kalidindi, S. R. Niezgoda, A. Fast, and N. Hampson
Journal: in press, Materials Science and Engineering A, 2008.
Delineation of First-Order Closures for Plastic Properties Requiring Explicit Consideration of Strain Hardening and Crystallographic Texture Evolution
Authors: M. Knezevic, S. R. Kalidindi, and R. K. Mishra
Journal: International Journal of Plasticity, 24, pp. 327-342, 2008.
2007
Integration of Microstructure Sensitive Design with Finite Element Methods: Elastic-Plastic Case Studies in FCC Polycrystals
Authors: J. R. Houskamp, G. Proust, and S. R. Kalidindi
Journal: International Journal of Multiscale Computational Engineering, 5, pp. 261-272, 2007.
Spectral methods for microstructure design
Authors: S. R. Kalidindi and D. T. Fullwood
Journal: JOM, 59, pp. 26-31, 2007.
Calibration of Elastic Localization Tensors to Finite Element Models: Application to Cubic Polycrystals
Authors: H. K. Duvvuru, X. Wu, and S. R. Kalidindi
Journal: Computational Materials Science, 41, pp. 138-144, 2007.
Application of the Spectral Methods of Microstructure Design to Continuous Fiber Reinforced Composites
Authors: S. R. Kalidindi and J. R. Houskamp
Journal: Journal of Composite Materials, 41, pp. 909-930, 2007.
Elastic–plastic property closures for hexagonal close-packed polycrystalline metals using first-order bounding theories
Authors: X. Wu, G. Proust, M. Knezevic and S.R. Kalidindi
Journal: Acta Materialia, 55, pp. 2729-2737, 2007.
Fast Computation of First-Order Elastic-Plastic Closures for Polycrystalline Cubic-Orthorhombic Microstructures
Authors: M. Knezevic and S. R. Kalidindi
Journal: Computational Materials Science, 39, pp. 643-648, 2007.
Generalized Pareto Front Methods Applied to Second-order Material Property Closures
Authors: D. T. Fullwood, B. L. Adams, and S. R. Kalidindi
Journal: Computational Materials Science, 38, pp. 788-799, 2007.
Application of Microstructure Sensitive Design to FCC Polycrystals
Authors: H. K. Duvvuru, M. Knezevic, R. K. Mishra, and S. R. Kalidindi
Journal: Materials Science Forum, 546-549, pp. 675-680, 2007.
Retention of the <001> Fiber Texture for Fe-Si Electric Motor Steels
Authors: R. D. Doherty, D. Stojakovic, F. J. G. Landgraf, and S. R. Kalidindi
Journal: Materials Science Forum, 550, pp. 497-502, 2007.
Prediction of crystallographic texture evolution and anisotropic stress-strain curves during large plastic strains in high purity alpha-titanium using a Taylor-type crystal plasticity model
Authors: X. Wu, S. R. Kalidindi, C. Necker, and A. A. Salem
Journal: Acta Materialia, 55, pp. 423-432, 2007.
2006
Finite Element Modeling of Crystal Plasticity with Grains Shaped as Truncated Octahedrons
Authors: L. Delannay, P. J. Jacques, and S. R. Kalidindi
Journal: International Journal of Plasticity, 22, pp. 1879-1898, 2006.
Strain-Path Effects on the Evolution of Microstructure and Texture during the Severe-Plastic Deformation of Aluminum
Authors: A.A. Salem, T.G. Langdon, T.R. McNelley, S.R. Kalidindi, and S.L. Semiatin
Journal: Metallurgical and Materials Transactions A VOLUME 37A, SEP 2006—2879
Application of the Spectral Methods of Microstructure Design to Continuous Fiber Reinforced Composites
Authors: J. Houskamp, S. R. Kalidindi
Journal: Journal of Composite Materials (2006)
Elastic properties closures using second-order homogenization theories: Case studies in composites of two isotropic constituents
Authors: S. R. Kalidindi, Massimiliano Binci, David Fullwood, Brent L. Adams
Journal: Acta Materialia, Volume 54 (2006) 3117–3126
On the elastic properties and mechanical damping of Ti3SiC2, Ti3GeC2, Ti3Si0.5Al0.5C2 and Ti2AlC in the 300–1573 K temperature range
Authors: M. Radovic, M.W. Barsoum, A. Ganguly, T. Zhen, P. Finkel, S.R. Kalidindi, E. Lara-Curzio
Journal: Acta Materialia, Volume 54 (2006) 2757–2767
Sapphire: A kinking nonlinear elastic solid
Authors: S. Basu, M. W. Barsoum, and S. R. Kalidindi
Journal: Journal of Applied Physics 99, 063501 (2006)
Procedures for construction of anisotropic elastic–plastic property closures for face-centered cubic polycrystals using first-order bounding relations
Authors: G. Proust, S. R. Kalidindi
Journal: Journal of the Mechanics and Physics of Solids, Volume 54 (2006) 1744–1762
Spectral calibration of crystal plasticity models
Authors: S. R. Kalidindi, H. K. Duvvuru and M. Knezevic
Journal: Acta Materialia, Volume 54 (2006) 1795–1804
Incipient and regular kink bands in fully dense and 10 vol.% porous Ti2AlC
Authors: A.G. Zhou, M.W. Barsoum, S. Basu, S.R. Kalidindi, T. El-Raghy
Journal: Acta Materialia 54 (2006) 1795–1804
Solid particle erosion resistance of thermally sprayed functionally graded coatings for polymer matrix composites
Authors: M. Ivosevic, R. Knight, S.R. Kalidindi, G.R. Palmese, J.K. Sutter
Journal: Surface & Coatings Technology 200 (2006) 5145 – 5151
Strain Hardening Due to Deformation Twinning in -Titanium: Mechanisms
Authors: A. A. Salem, S. R. Kalidindi, R. D. Doherty, and S. L. Semiatin
Journal: Metallurgical and Materials Transactions, 37A, pp. 259-268, 2006.
Macroscale Constitutive Modeling of Kinking Nonlinear Elastic Solids
Authors: S. R. Kalidindi, T. Zhen, and M. W. Barsoum
Journal: Materials Science and Engineering A, 418, pp. 95-98, 2006.
2005
A Crystal plasticity finite element analysis of texture evolution in equal channel angular extrusion
Authors: S. Li, S. R. Kalidindi, and I. J. Beyerlein
Journal: Materials Science & Engineering A 410-411 (2005) 207-212.
Compressive creep of fine and coarse-grained Ti3SiC2 in air in the 1100-1300o C temperature range
Authors: T. Zhen, M.W. Barsoum, S. R. Kalidindi, M. Radovic, Z. M. Sun and T. El-Raghy
Journal: Acta Materialia 53 (2005). Pages 4963-4973.
Effects of Temperature, Strain Rate and Grain Size on the Mechanical Compressive Response of Ti3SiC2
Authors: T. Zhen, M. W. Barsoum, and S. R. Kalidindi
Journal: Acta Materialia, 53 (2005). Pages 4163-4171.
Spectral methods for capturing crystallographic texture evolution during large plastic strains in metals
Authors: Surya.R. Kalidindi, and Hari. K. Duvvuru
Journal: Acta Materialia 53 (2005) 3613-3623.
Finite approximations to the second-order properties closure in single phase polycrystals
Authors: Brent. L. Adams, Xiang (Carl) Gao, and S.R. Kalidindi
Journal: Acta Materialia 53 (2005) 3563-3577 .
Strain hardening due to deformation twinning in α-titanium: Constitutive relations and crystal plasticity modeling
Authors: A. A. Salem, S.R. Kalidindi, and S.L. Semiatin
Journal: Acta Materialia 53 (2005) 3495-3502 .
Microscale modeling of kinking nonlinera elastic solids
Authors: M. W. Barsoum, T. Zhen, A. Zhou, S. Basu and S.R. Kalidindi
Journal: Physical Review B71, 2005 .
Dynamic Elastic Hysteretic Solids and Dislocations
Authors: M. W. Barsoum, M. Radovic, T. Zhen, P. Finkel, and S. R. Kalidindi
Journal: Physical Review Letters 94, 085501 (2005).
Microstructure sensitive design with first order homogenization theories and finite element codes
Authors: S. R. Kalidindi, J. Houskamp, G. Proust, and H. Duvvuru
Journal: Materials Science Forum, 495-497, 2005. Pages 23-29.
2004
Effect of the Crystal Orientation on the Measured Response during Nanoindentation
Authors: G. Proust and S. R. Kalidindi
Journal: TMS Letters (The Minerals,Metals and Materials Society), 1 (7) (2004), pp. 151-152.
A quantitative evaluation of the deformed texture predictions for aluminium alloys from crystal plasticity finite element method
Authors: S. Li, P. Van Houtte, and S. R. Kalidindi
Journal: Modelling and Simulation in Materials Science and Engineering 12: 2004. Pages 845-870.
Kinking Nonlinear Elastic Solids, Nanoindentations, and Geology
Authors: M. W. Barsoum, A. Murugaiah, S. R. Kalidindi, and T. Zhen
Journal: Physical Review Letters 92, 255508 (2004)
Detailed Analyses of Grain-Scale Plastic Deformation in Columnar Polycrystalline Aluminum Using Orientation Image Mapping and Crystal Plasticity Models
Authors: S. R. Kalidindi, A. Bhattacharya, and R.D. Doherty
Journal: Proceedings of Royal Society of London A 460, pp. 1935-1956, 2004.
Microstructure sensitive design of an orthotropic plate subjected to tensile load
Authors: Surya R. Kalidindi, J. Houskamp, M. Lyons, B. L. Adams
Journal: International Journal of Plasticity: 20 (2004) 1561-1575
Kink bands, nonlinear elasticity and nanoindentations in graphite
Authors: M.W. Barsoum,A.Murugaiah, S.R.Kalidindi, T. Zhen and Y. Gogotsi
Journal: Carbon 42 (2004), 1435-1445
Spherical nanoindentations and kink bands in Ti3SiC2
Authors: A.Murugaiah, M.W. Barsoum, S.R.Kalidindi, and T. Zhen
Journal: Materials Research Society, Vol 19 No.4 (2004)
Texture evolution during equal channel angular extrusion Part I Effect of route, number of passes and initial texture
Authors: S.Ferrasse, V.M. Segal, S.R.Kalidindi, F. Alford
Journal: Materials Science and Engineering, A368 (2004) 28-40
2003
Erosion/Oxidation Resistant Coatings For High Temperature Polymer Composites
Authors: M. Ivosevic, R. Knight, S. R. Kalidindi, G. R. Palmese, and J. K. Sutter
Journal: High Performance Polymers 15: 2003. Pages 503-518.
How Do Polycrystalline Materials Deform Plastically?
Authors: S.R. Kalidindi, A. Bhattacharyy, R.D. Doherty
Journal: Advanced Materials 15, No. 16, Aug 15: 2003. Pages 1345-1348
Erratum to "Quantitative prediction of textures in aluminium cold rolled to moderate strains"
Authors: L. Delannay, S.R. Kalidindi, P. Van Houtte
Journal: Materials Science and Engineering A 351: 2003. Pages 358-359
Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1 GPa
Authors: M.W. Barsoum, T. Zhen, S.R. Kalidindi, M. Radovic, A. Murugaiah
Journal: Nature Materials 2: FEB 2003. Pages 107-111
Plane strain fracture toughness of MP35N in aged and unaged conditions measured using modified CT specimens
Authors: Ebrahim M. Shaji, Surya R. Kalidindi, Roger D. Doherty, Aleksandar S. Sedmak
Journal: Materials Science and Engineering A 340: 2003. Pages 163-169
The role of crystallinity in the crystallographic texture evolution of polyethylenes during tensile deformation
Authors: D.S. Li, H. Garmestani, R.G. Alamo, S.R. Kalidindi
Journal: Polymer 44: 2003. Pages 5355-5367
Role of deformation twinning on strain hardening in cubic and hexagonal polycrystalline metals
Authors: S.R. Kalidindi, A.A. Salem, R.D. Doherty
Journal: Advanced Engineering Materials 5: APR 2003. Page 229
Strain hardening of titanium: role of deformation twinning
Authors: Ayman A. Salem, Surya R. Kalidindi, Roger D. Doherty
Journal: Acta Materialia 51: 2003. Pages 4225-4237
Fracture properties of multiphase alloy MP35N
Authors: Ebrahim M. Shaji, Surya R. Kalidindi, Roger D. Doherty, Aleksandar S. Sedmak
Journal: Materials Science and Engineering A 349: 2003. Pages 313-317
2002
Comparison of two grain interaction models for polycrystal plasticity and deformation texture prediction
Authors: P. Van Houtte, L. Delannay, S.R. Kalidindi
Journal: International Journal of Plasticity 18: 2002. Pages 359-377
Modeling microstructure-based anisotropy in BCC polycrystals during changing strain paths
Authors: B. Peeters, S.R. Kalidindi, C. Teodosiu, P. Van Houtte, E. Aernoudt
Journal: Local Lattice Rotations and Disclinations in Microstructures of Distorted Crystalline Materials 87: 2002. Pages 163-168
Modeling the evolution of anisotropy in Al-Li alloys: application to Al-Li 2090-T8E41
Authors: H. Garmestani, S.R. Kalidindi, L. Williams, C.M. Bacaltchuk, C. Fountain, E.W. Lee, O.S. Es-Said
Journal: International Journal of Plasticity 18: 2002. Pages 1373-1393
Quantitative prediction of textures in aluminium cold rolled to moderate strains
Authors: L. Delannay, S.R. Kalidindi, P. Van Houtte
Journal: Materials Science and Engineering A 336: 2002. Pages 233-244
Spectral integration of microstructure and design
Authors: B.L. Adams, M. Lyon, B. Henrie, S.R. Kalidindi, H. Garmestani
Journal: Textures of Materials Pts 1 and 2, Materials Science Forum 408-4: 2002. Pages 487-492
Strain hardening regimes and microstructure evolution during large strain compression of high purity titanium
Authors: Ayman A. Salem, Surya R. Kalidindi, Roger D. Doherty
Journal: Scripta Materialia 46: 2002. Pages 419-423
A theoretical investigation of the influence of dislocation sheets on evolution of yield surfaces in single-phase BCC polycrystals
Authors: Bart Peeters, Surya R. Kalidindi, Cristian Teodosiu, Paul Van Houtte, Etienne Aernoudt
Journal: Journal of the Mechanics and Physics of Solids 50: 2002. Pages 783-807
2001
Crystallographic texture evolution in high-density polyethylene during uniaxial tension
Authors: D. Li, H. Garmestani, S.R. Kalidindi, R. Alamo
Journal: Polymer 42: 2001. Pages 4903-4913
A disclination-based model for grain subdivision
Authors: M. Seefeldt, L. Delannay, B. Peeters, S.R. Kalidindi, P. Van Houtte
Journal: Materials Science and Engineering A 319-321: 2001. Pages 192-196
Editorial - Seventh International Conference on Plasticity
Author: Surya R. Kalidindi
Journal: International Journal of Plasticity 17: 2001. Page 781
Evolution of grain-scale microstructure during large strain simple compression of polycrystalline aluminum with quasi-columnar grains: OIM measurements and numerical simulations
Authors: Abhishek Bhattacharyya, Ehab El-Danaf, Surya R. Kalidindi, Roger D. Doherty
Journal: International Journal of Plasticity 17: 2001. Pages 861-883
Finite element modeling of microscale thermal residual stresses in Al interconnects
Authors: A. Saerens, P. Van Houtte, S.R. Kalidindi
Journal: Journal of Materials Research 16: APR 2001. Pages 1112-1122
Fixation strength of swellable bone anchors in low-density polyurethane foam
Authors: Y.H. Nien, S.R. Kalidindi, S. Siegler
Journal: Journal of Biomedical Materials Research 58: 2001. Pages 137-146
The incorporation of dislocation sheets into a model for plastic deformation of BCC polycrystals and its influence on r-values
Authors: B. Peeters, M. Seefeldt, S.R. Kalidindi, P. Van Houtte, E. Aernoudt
Journal: Materials Science and Engineering A 319-321: 2001. Pages 188-191
Influence of deformation path on the strain hardening behavior and microstructure evolution in low SFE FCC metals
Authors: Ehab El-Danaf, Surya R. Kalidindi, Roger D. Doherty
Journal: International Journal of Plasticity 17: 2001. Pages 1245-1265
Microstructure-Sensitive design of a compliant beam
Authors: B.L. Adams, A. Henrie, B. Henrie, M. Lyon, S.R. Kalidindi, H. Garmestani
Journal: Journal of the Mechanics and Physics of Solids 49: 2001. Pages 1639-1663
Modeling anisotropic strain hardening and deformation textures in low stacking fault energy FCC metals
Author: Surya R. Kalidindi
Journal: International Journal of Plasticity 17: 2001. Pages 837-860
Modeling the evolution of dislocation sheets during strain-path changes and their influence on the Baushinger effect of BCC polycrystals
Authors: B. Peeters, C. Teodosiu, S. R. Kalidindi, P. Van Houtte, and E. Aernoudt
Journal: Journal de Physique IV 11: 2001. Pages 119-126
A theoretical investigation of the contribution of texture and dislocation sheets on strain path change effects in BCC metals
Authors: B. Peeters, P. Van Houtte, S.R. Kalidindi, E. Aernoudt
Journal: Journal De Physique IV 11: SEP 2001. Pages 365-372
Work-hardening/softening behavior of BCC polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an IF steel during two-stage strain paths
Authors: B. Peeters, M. Seefeldt, C. Teodosiu, S.R. Kalidindi, P. Van Houtte, E. Aernoudt
Journal: Acta Materialia 49: 2001. Pages 1607-1619
2000
A crystal plasticity based work-hardening/softening model for BCC metals under changing strain paths
Authors: B. Peeters, S.R. Kalidindi, P. Van Houtte, E. Aernoudt
Journal: Acta Materialia 48: 2000. Pages 2123-2133
Deformation texture transition in brass: critical role of micro-scale shear bands
Authors: E. El-Danaf, S.R. Kalidindi, R.D. Doherty, C. Necker
Journal: Acta Materialia 48: 2000. Pages 2665-2673
On the prediction of yield surfaces by the crystal plasticity models for FCC polycrystals
Authors: S.R. Kalidindi, S.E. Schoenfeld
Journal: Materials Science and Engineering A 293: 2000. Pages 120-129
Swelling of crosslinked poly(methylmethacrylate-acrylic acid) copolymers in serum and saline solutions
Authors: G.M. Gualtieri, R.H. Gobran, Y.H. Nien, S.R. Kalidindi
Journal: Journal of Applied Polymer Science 79: FEB 28 2000. Pages 1653-1664
Biological and mechanical characteristics of the interface between a new swelling anchor and bone
Authors: G.M. Gualtieri, S. Siegler, E.L. Hume, S.R. Kalidindi
Journal: Journal of Orthopaedic Research 18: MAY 2000. Pages 494-499
1999
Ambient- and high-temperature properties of titanium carbide-titanium boride composites fabricated by transient plastic phase processing
Authors: D. Brodkin, A. Zavaliangos, S.R. Kalidindi, M.W. Barsoum
Journal: Journal of the American Ceramic Society 82: MAR 1999. Pages 665-672
Influence of cold-work and aging heat treatment on strength and ductility of MP35N
Authors: Ebrahim M. Shaji, Surya R. Kalidindi, Roger D. Doherty
Journal: Materials Science and Engineering A 272: 1999. Pages 371-379
Influence of grain size and stacking-fault energy on deformation twinning in FCC metals
Authors: E. El-Danaf, S.R. Kalidindi, R.D. Doherty
Journal: Metallurgical and Materials Transactions A 30: MAY 1999. Pages 1223-1233
Processing and mechanical properties of Ti3SiC2: II, effect of grain size and deformation temperature
Authors: T. El-Raghy, M.W. Barsoum, A. Zavaliangos, S.R. Kalidindi
Journal: Journal of the American Ceramic Society 82: OCT 1999. Pages 2855-2860
1998
On the accuracy of the predictions of texture evolution by the finite element technique for FCC polycrystals
Authors: Venugopal Bachu, Surya R. Kalidindi
Journal: Materials Science and Engineering A 257: 1998. Pages 108-117
Effect of water absorption on the Izod impact energy of crosslinked poly(methylmethacrylate-acrylic acid) and their composites
Authors: A. Abusafieh, S.R. Kalidindi
Journal: Polymer Composites 19: FEB 1998. Pages 23-30
Incorporation of deformation twinning in crystal plasticity models
Authors: Surya R. Kalidindi
Journal: Journal of the Mechanics and Physics of Solids 46: 1998. Pages 267-290
Modeling the strain hardening response of low SFE FCC alloys
Authors: Surya R. Kalidindi
Journal: International Journal of Plasticity 14: 1998. Pages 1265-1277
The secondary hardening phenomenon in strain-hardened MP35N alloy
Authors: S. Asgari, E. El-Danaf, E. Shaji, S.R. Kalidindi, R.D. Doherty
Journal: Acta Materialia 46: 1998. Pages 5795-5806
1997
Accurate characterization of machine compliance for simple compression testing
Authors: S.R. Kalidindi, A. Abusafieh, E. El-Danaf
Journal: Experimental Mechanics 37: JUNE 1997. Pages 210-215
Damage mechanisms around hardness indentations in Ti3SiC2
Authors: T. El-Raghy, A. Zavaliangos, M.W. Barsoum, S.R. Kalidindi
Journal: Journal of the America Ceramic Society 80: FEB 1997. Pages 513-516
Determination of unknown stress states in silicon wafers using microlaser Raman spectroscopy
Authors: S. Narayanan, S.R. Kalidindi, L.S. Schadler
Journal: Journal of Applied Physics 82: SEP 1 1997. Pages 2595-2602
Development of self-anchoring bone implants .I. Processing and material characterization
Authors: A. Abusafieh, S. Siegler, S.R. Kalidindi
Journal: Journal of Biomedical Materials Research 38: WIN 1997. Pages 314-327
Development of self-anchoring bone implants .II. Bone implant interface characteristics in vitro
Authors: A. Vemuganti, S. Siegler, A. Abusafieh, S.R. Kalidindi
Journal: Journal of Biomedical Materials Research 38: WIN 1997. Pages 328-336
Numerical evaluation of isostrain and weighted-average models for elastic moduli of three-dimensional composites
Authors: Surya R. Kalidindi, Eric Franco
Journal: Composites Science and Technology 57: 1997. Pages 293-305
A numerical investigation of the mechanics of swelling-type intramedullary hip implants
Authors: S.R. Kalidindi, P. Ahmad
Journal: Journal of Biomechanical Engineering-Transactions of the ASME 119: AUG 1997. Pages 241-247
Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy FCC alloys that form deformation twins
Authors: Sirous Asgari, Ehab El-Danaf, Surya R. Kalidindi, Roger D. Doherty
Journal: Metallurgical and Materials Transactions A 28A: SEP 1997. Pages 1781-1795
Synthesis and characterization of a poly(methylmethacrylate-acrylic acid) copolymer for bioimplant applications
Authors: A. Abusafieh, R. Gobran, S.R. Kalidindi
Journal: Journal of Applied Polymer Science 63: JAN 3 1997. Pages 75-87
Synthesis of nickel aluminides by vacuum plasma spraying and exothermic in-situ reactions
Authors: Timothy S. Hussey, Michael J. Koczak, Ronald W. Smith, Surya R. Kalidindi
Journal: Materials Science and Engineering A 229: 1997. Pages 137-146
1996
Microstructural evolution during transient plastic phase processing of titanium carbide-titanium boride composites
Authors: D. Brodkin, S.R. Kalidindi, M.W. Barsoum, A. Zavaliangos
Journal: Journal of the American Ceramic Society 79: JUL 1996. Pages 1945-1952
Longitudinal and transverse moduli and strengths of low angle 3-D braided composites
Authors: S.R. Kalidindi, A. Abusafieh
Journal: Journal of Composite Materials 30: 1996. Pages 885-905
1995
The transient plastic phase processing of ceramic-ceramic composites
Authors: M.W. Barsoum, A. Zavaliangos, S.R. Kalidindi, T. El-Raghy, D. Brodkin
Journal: Journal of the Minerals Metals & Materials Society 47: NOV 1995. Pages 52-55
1994
Macroscopic shape change and evolution of crystallographic texture in pre-textured FCC metals
Authors: S.R. Kalidindi, L. Anand
Journal: Journal of the Mechanics and Physics of Solids 42: MAR 1994. Pages 459-490
The process of shear-band formation in plane-strain compression of FCC metals - effects of crystallographic texture
Authors: L. Anand, S.R. Kalidindi
Journal: Mechanics of Materials 17: MAR 1994. Pages 223-243
1993
Large deformation simple compression of a copper single-crystal
Authors: S.R. Kalidindi, L. Anand
Journal: Metallurgical Transactions A 24: APR 1993. Pages 989-992
1992
An approximate procedure for predicting the evolution of crystallographic texture in bulk deformation processing of FCC metals
Authors: S.R. Kalidindi, L. Anand
Journal: International Journal of Mechanical Sciences 34: APR 1992. Pages 309-329
Crystallographic texture evolution in bulk deformation processing of FCC metals
Authors: S.R. Kalidindi, C.A. Bronkhorst, L. Anand
Journal: Journal of the Mechanics and Physics of Solids 40: 1992. Pages 537-569
Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals
Authors: C.A. Bronkhorst, S.R. Kalidindi, L. Anand
Journal: Philosophical Transactions of the Royal Society of London Series A 341: DEC 15 1992. Pages 443-477
1991
An experimental and analytical study of the evolution of crystallographic texturing in FCC materials
Authors: C.A. Bronkhorst, S.R. Kalidindi, L. Anand
Journal: Textures and Microstructures 14: 1991. Pages 1031-1036
A unified approach for modeling CVD processes
Authors: S.R. Kalidindi, S.B. Desu
Journal: Journal of the Electrochemical Society 138: APR 1991. Pages 962-969
1990
Analytical model for the low-pressure chemical vapor-deposition of SiO2 from tetraethoxysilane
Authors: S.R. Kalidindi, S.B. Desu
Journal: Journal of the Electrochemical Society 137: FEB 1990. Pages 624-628
Determination of rate controlling step in CVD processes with gas-phase and surface-reactions
Authors: S.B. Desu, S.R. Kalidindi
Journal: Japanese Journal of Applied Physics Part 1-Regular Papers Short Notes & Review Papers 29: JUL 1990. Pages 1310-1315
MSR acoustic vibrations due to the HP and LP tube bundle and cavity interaction using a bond graph model
Authors: S.R. Kalidindi, W.G. Perera
Journal: Applied Acoustics 30: 1990. Pages 303-320
Reliability Calibration of Fatigue Evaluation and Design Procedures
Authors: S. K. Raju, F. Moses and C. Schilling
Journal: ASCE Journal of Structural Engineering 116: 1990. Pages 1356-1369.